Eph Rf Yplan Pack

The EPH Controls CR22P Y-Plan Control Pack contains the B322PF 3-Port Motorised Valve, R27-HW 2-Zone Programmer, CM2 Combi Room Thermostat, WRP Pipe/Cylinder Thermostat and WC2 Wiring Centre.

Product Features - 

B322PF 3-Port Motorised Valve
The B322PF 3-Port Motorised Valve has a detachable actuator and cable. The valve is an ideal solution for zoning hot water and central heating circuits.
Connection: 22mm Compression fittings
Flow Rate: 4.6 kvs
Max. Close off pressure: 1.6 bar (Port A) / 1.2 bar (Port B)
Switch rating: 5(2)A 230V AC
Max. Pressure: 21 bar
Max. Ambient Temperature: 50°C
Max. Fluid Temperature: 88°C
R27-HW 2-Zone Programmer
The R27-HW Programmer is capable of controlling 2 zones with 3- on/off periods per day with either 24 hour, 5/2 day or 7 day scheduling.
Timing: 24 Hour, 5/2 Day or 7 Day
Operation periods: 3 per day
Switch output: 230V AC
Switch rating: 3(1) A
Backplate type: 6 Pin
CM2 Combi Room Thermostat
The CM2 Mechanical Room Thermostat is suitable for use in residential or light commercial applications and provides flexible individual room control.
Temperature Setpoint: 5°C to 35°C (Limitable)
Switching differential: ± 1°C
Contact: SPDT
Switch rating: 10(3) A 230V & 24V AC
IP Rating: IP20
WRP Pipe/Cylinder Thermostat
The Pipe/Cylinder Thermostat is suitable for controlling hot water cylinders or central heating pumps.
Temperature range: 0°C to 90°C
Switching differential: ±5°C
Sensor type: Gas filled
IP rating: IP20
Contact rating: 16(4) A 250 VAC
WC2 Wiring Centre
The Wiring centre is designed for use with central heating systems and has 12 terminals.
Temperature range: 10°C to 90°C
Mounting type: Wall with 1.5m cable sensor
Wireless Range: Max 30m
Power supply: 2x AAA (included)
In-built frost protection: 5°C
WC2 Wiring Centre
The Wiring centre is designed for use with central heating systems and has 12 terminals.